Skip to content
1.888.434.2897inquiries@suprocktech.com
Suprock Technologies
  • Home
  • Solutions
  • Industries
    • Power Generation
    • Manufacturing
    • Automotive
    • Aerospace
    • Marine
    • Steel & Paper
  • Innovations
  • News
  • Contact

Category: Work

From the Blog

Boiler header pipe crack monitoring using high temp strain gages

Posted on December 10, 2020December 10, 2020

Through a joint effort with EPRI and American Electric Power (AEP), we have installed our latest high temperature strain gage modules on high temperature boiler header piping to monitor cracking in real time. The high temperature gages are pre-installed on weldable shims for easy installation free of special adhesives and soldering in the field.  The […]

From the Blog

Long distance high bandwidth data transmission in real time

Posted on September 30, 2020November 4, 2020

Testing long distance data transmission of high-bandwidth sensor data @ beautiful Newfound Lake in New Hampshire. We tested two different antenna types, both were successful in transmitting data from 4 of our coaxial vibration sensors @ a bandwidth of 22kHz each, over a distance of 4.66 miles (7.5km).

From the Blog

UPDATE: Greatly enhanced manufacturing capability and a shoutout to Elliot Hansen

Posted on June 22, 2020June 22, 2020

We have been spending this time massively upgrading our manufacturing capability. Our next generation high-temp printable strain gages can now be built 100% in-house. We are proud to have worked with Elliot Hansen from East Coast Induction. He worked as a RF telemetry engineer on the Apollo program and we are proud to be working […]

Work

Chris demonstrating displacement sensor for generator rim float

Posted on September 18, 2019June 30, 2020

Modern grid issues, old age and flex-ops has brought numerous new problems to the hydropower industry. One of these is generator rim float. Hydroelectric assemblies are rather stout and can run with minor float issues but as the problem worsens it can lead to an irregular air-gap, key fretting, accentuated magnetic forces between the rotor […]

Work

A day at the office

Posted on June 16, 2018March 3, 2019

  It’s alive, again

© Suprock Technologies, 2018

Downloads

Contact us:

45 SCOTT HILL RD
1888-434-2897
inquiries@suprocktech.com

Suprocktech Recent Posts:

  • Torque sensor embedded in Lovejoy coupling
  • Boiler header pipe crack monitoring using high temp strain gages
  • Haptica employs our wireless torque monitoring technology for vehicle testing in Europe
  • Long distance high bandwidth data transmission in real time