Dr. Suprock demonstrates our high-temp strain gages’ remarkable stability at extreme temperatures (1,200°F) The max constant operating temp of our gages is currently 1800°F/980°C. Even better, this stability comes with supersonic frequency bandwidth, useful for gas turbine combustion dynamics, HRSG monitoring, boiler pipe crack monitoring, etc. These strain gages can now be “printed” onto metal […]
Modern grid issues, old age and flex-ops has brought numerous new problems to the hydropower industry. One of these is generator rim float. Hydroelectric assemblies are rather stout and can run with minor float issues but as the problem worsens it can lead to an irregular air-gap, key fretting, accentuated magnetic forces between the […]
Modern grid issues, old age and flex-ops has brought numerous new problems to the hydropower industry. One of these is generator rim float. Hydroelectric assemblies are rather stout and can run with minor float issues but as the problem worsens it can lead to an irregular air-gap, key fretting, accentuated magnetic forces between the rotor […]
Recently we helped out our neighbors to the north with Hydro TG torsional monitoring in the most prestigious powerhouses in North America. Our friends at OPG were interested in monitoring TG performance and civil structure performance on the Niagara Sir Adam Beck plant. The installations were performed in conjunction with Electric Power Research Institute (EPRI) […]
Francesco gives a demonstration of the ease of installation and use of our strain-based wireless shaft torque sensors. The sensor in this video has been configured to measure dynamic torque. Just like a traditional strain gage, the modules can be orientated for different parameters such as bending stress. Because of the extreme sensitivity and dynamic […]